Release Notes

This page will be updated regularly. Check back often for the latest features, updates, and changes.

​

Latest Versions

• CLI
  • Date: September 28, 2026
  • Version Info
    • npm: 3.17.2
  • Installation Instructions

​

CLI v3.17.2 Release

• Date: September 28, 2026
• Version Info
  • npm: 3.17.2
• Patch Changes
  • Fix --wait on cpln helm install, cpln helm upgrade, and cpln helm rollback failing at --timeout on a suspended workload. A workload suspended in every location runs nothing and never becomes ready, so --wait no longer waits for it.
  • Fix the START TIME and COMPLETION TIME reported by cpln workload cron get. They showed when the run was requested and when its record last changed, and now show when the execution itself started and finished.
  • Fix the table output of cpln workload cron get and cpln workload cron start printing the command ID under ACTIVE DEADLINE (s). The ID now appears under NAME OR COMMAND ID, and ACTIVE DEADLINE (s) shows the run’s deadline when one is set.

​

CLI v3.17.1 Release

• Date: September 18, 2026
• Version Info
  • npm: 3.17.1
• Patch Changes
  • Fix cpln apply with --ready failing after five minutes on a suspended workload. A suspended workload runs nothing and never becomes ready, so --ready no longer waits for it.

​

CLI v3.17.0 Release

• Date: September 15, 2026
• Version Info
  • npm: 3.17.0
• Minor Changes
  • Add cpln profile create <profile> as a command of its own.
  • Refuse a cpln helm upgrade or cpln helm rollback that would move a release out of a GVC, before anything is written. Pass --delete-leftover-resources to delete what would be stranded and proceed. See Moving a release between GVCs.
  • Delete a GVC only when it holds nothing, and leave one the release no longer declares in place on cpln helm uninstall. Every skip is printed with its reason.
  • Print the cleanup plan before an upgrade or rollback writes anything, so a surprising deletion is visible in time to cancel.
  • Check the cpln/release tag before cleanup or an uninstall deletes a resource, and remove that tag from everything an uninstall leaves behind.

​

CLI v3.16.0 Release

• Date: August 12, 2026
• Version Info
  • npm: 3.16.0
• Minor Changes
  • Add --build-arg to cpln image build to set build-time variables, as --build-arg NAME=value, or --build-arg NAME to take the value from your environment. Repeat the option for each arg. It applies to local and --remote builds alike, and a build with no Dockerfile warns that the args were not consumed, since buildpack builds ignore them.
  • Add --secret to cpln image build to expose a secret to a Dockerfile build, in the form --secret id=<id>[,src=<source>]. src takes a local file path, or cpln://secret/<name>[.<field>] to name a secret in your org, which the CLI reveals for the build alone and never bakes into the image. A --remote build accepts only cpln://secret/... sources. Buildpack builds cannot consume secrets, so the option requires a Dockerfile.
  • Add --dry-run to the commands that write a resource: create, update, patch, edit, clone, tag, cpln apply, and the subcommands that modify a resource, such as gvc add-location, group add-member, policy add-binding, and workload start. The platform validates the request and returns the resource that would be written, and nothing is stored. Output defaults to yaml-slim, so the result reads as a manifest; pass --output for another format. On cpln apply, --dry-run cannot be combined with --ready, since nothing is created to wait for.
  • Upgrade a standalone macOS install in place with cpln upgrade, which now installs the signed and notarized disk image for Intel and Apple silicon instead of printing manual instructions.
  • Recognize bun and yarn berry installs in cpln upgrade: a global bun install upgrades with bun add -g, and a project dependency installed by yarn berry is no longer read as a global install. The new-version notice now closes with the step that fits the install, pointing a project dependency at its package.json instead of at cpln upgrade.
• Patch Changes
  • Stop cpln upgrade before it downloads a release when the install directory cannot be written to, and name the way out for the platform: re-run with sudo, or from a terminal opened with “Run as administrator” on Windows.
  • Clear the scratch files a binary upgrade can leave in the install directory on Windows, where the executable in use cannot be deleted and is moved aside instead.

​

CLI v3.15.0 Release

• Date: July 27, 2026
• Version Info
  • npm: 3.15.0
• Minor Changes
  • Add --remote to cpln image build to build remotely instead of through local Docker. The CLI uploads the --dir folder, Control Plane detects how to build the source, and the image is pushed to the org’s private registry, so neither a Docker daemon nor --push is needed. Build logs stream to the terminal, and interrupting the command leaves the build running remotely.
  • Build straight from a repository with cpln image build --remote --repo <https-url>, optionally pinned to a --branch. GitHub and GitLab are supported; the first build of a private repository opens a browser once to connect the org’s git provider.
  • Add --detach to cpln image build to start a remote build and return without following it. The image appears in cpln image get once the build pushes it.
  • Open the browser automatically during cpln login, while still printing the sign-in URL as a fallback for headless environments.
• Patch Changes
  • Keep digit-shaped values as typed in cpln image build and cpln cp, so an image tag, branch, directory, or container name such as 1.10 no longer loses its trailing zero.

​

CLI v3.14.1 Release

• Date: July 20, 2026
• Version Info
  • npm: 3.14.1
• Patch Changes
  • Fix cpln workload run failing on a healthy deployment that is slow to become ready — a transient platform message is no longer read as a stalled deployment. Pass --verbose to see the deployment status while it waits.

​

CLI v3.14.0 Release

• Date: July 20, 2026
• Version Info
  • npm: 3.14.0
• Minor Changes
  • Add cpln metrics query <promql> to run a PromQL query against your organization’s metrics. Runs an instant query by default; pass --from, --to, --since, and --step for a range query, or --time to evaluate at a specific moment.
  • Add cpln upgrade (alias cpln update) to update the CLI in place. It detects whether the CLI was installed via npm, Homebrew, or a standalone binary and runs the matching upgrade. Pass --check to compare the installed and latest versions without upgrading, or --force to reinstall the latest even when already up to date.
  • Add a cpln version command that prints the installed CLI version — the same output as cpln --version — and add -v as a short alias for --version.
  • Accept relative durations in the --from and --to flags of cpln logs, in addition to absolute ISO 8601 timestamps. For example, --from 7d, --from now-30m, or --to 1h.
  • Add --name to cpln workload cron run to run against a runner workload with an exact name, creating it if needed, instead of the generated cpln-run-* runner. A stable name can be referenced elsewhere, such as a called service’s internal firewall allowlist.
  • Honor envFrom in the K8s Converter, expanding each ConfigMap and Secret key into an environment variable.
  • Infer firewallConfig.internal.inboundAllowType: same-gvc for converted workloads backed by a Kubernetes Service.
  • Add the cpln.io/workload-type, cpln.io/inherit-env, and cpln.io/internal-inbound-allow-type annotations to control conversion.
  • Convert ReadWriteMany/ReadOnlyMany PVCs to shared volumesets, mountable by any workload type.
    Existing workloads from an older ReadWriteMany/ReadOnlyMany conversion keep their dedicated storage, since the file system type and workload type are immutable; the shared conversion applies to newly created workloads.
  • Hint at the cpln.io/workload-type annotation when cpln apply --k8s fails with Workload type may not be changed.
• Patch Changes
  • Fail cpln workload run fast when a deployment stalls before becoming ready — for example, when it is paused because a referenced secret cannot be revealed — aborting with the platform’s reason instead of waiting for the readiness poll to time out. Terminal sessions now also exit non-zero on a transport or backend session error instead of reporting success.
  • Retry cpln image build —push and cpln image copy on transient proxy and connection-closed errors before giving up. Permanent failures such as bad credentials or a missing image still fail immediately.
  • Fix base64 secret data not being decoded when merged with stringData.
  • Surface K8s conversion warnings on cpln convert -o yaml and on failed cpln apply --k8s.

​

CLI v3.13.0 Release

• Date: July 14, 2026
• Version Info
  • npm: 3.13.0
• Minor Changes
  • Switch cpln login to a device-code flow. The command prints a sign-in URL and a confirmation code to enter in any browser, so logging in works from SSH sessions, containers, and other headless environments.
  • Add request to cpln quota to manage quota increase requests: cpln quota request create <name> --requested-max <value> submits one, cpln quota request get <id> shows its status, and cpln quota request list [--status pending|approved|denied] reviews them. Requests within your account’s boundary are approved automatically; the rest await administrator approval.
• Patch Changes
  • Fix cpln sandbox connect SSH authentication against de-rooted sandbox images by connecting as devuser instead of root.

​

CLI v3.12.0 Release

• Date: July 3, 2026
• Version Info
  • npm: 3.12.0
• Minor Changes
  • Add cpln sandbox connect command to connect to a running sandbox over an SSH tunnel using VS Code, Cursor, SSH, the browser IDE, or a terminal (--ide vscode|cursor|ssh|browser|terminal).
• Patch Changes
  • Restore the terminal’s stdin state after interactive exec sessions end.

​

CLI v3.11.0 Release

• Date: June 12, 2026
• Version Info
  • npm: 3.11.0
• Minor Changes
  • Add health subcommand to cpln mk8s to show the health status of an mk8s cluster.
  • Determine workload readiness from the workload health object instead of deployments.
• Patch Changes
  • Fix cpln login popup authentication being blocked by Chrome’s Cross-Origin-Opener-Policy (COOP).
  • Fix --publish option handling in the cpln agent up command.
  • Fix cpln port-forward crash when the IPv6 loopback address cannot be bound.
  • Upgrade dependencies to resolve known security vulnerabilities and the uuid deprecation warning.

​

CLI v3.10.2 Release

• Date: May 6, 2026
• Version Info
  • npm: 3.10.2
• Patch Changes
  • Fix —arg and —header dropping option-shaped values

​

CLI v3.10.1 Release

• Date: April 3, 2026
• Version Info
  • npm: 3.10.1
• Patch Changes
  • Upgraded dependencies to resolve known security vulnerabilities.
  • Add pagination to logs command to fetch beyond server limit.
  • Fix ConfigMap and Secret name collision in k8s-converter.

​

CLI v3.10.0 Release

• Date: March 16, 2026
• Version Info
  • npm: 3.10.0
• Minor Changes
  • Add --identity flag to cpln workload cron run subcommand, when given a new cron workload with that identity will be created or an existing one that has it will be used.
  • Add predictive autoscaling to volumeset create and update commands.
  • Add cpln volumeset shrink command.
  • Add schedule-name and active-deadline-seconds args to cpln workload cron start command.

​

CLI v3.9.1 Release

• Date: February 11, 2026
• Version Info
  • npm: 3.9.1
• Patch Changes
  • Revert cpln workload run to original standard workload-based execution
  • Move cron-based run logic to new cpln workload cron run subcommand

​

CLI v3.9.0 Release

• Date: February 6, 2026
• Version Info
  • npm: 3.9.0
• Minor Changes
  • Add audit subcommand to resource commands (e.g., cpln workload audit, cpln gvc audit) to retrieve audit trail events.
  • Refactor shell completion system to remove tabtab dependency.
  • Refactor cpln workload run to use a persistent suspended cron workload.
  • Add --unset flag to the update command for removing properties and named array items.
  • Add requestRetryPolicy and extras paths to cpln workload update with JSON support.
  • Add --timeoutSeconds option to cpln volumeset expand command.
  • Add pagination warning when more records are available beyond the default limit, guiding users to use --max 0 to fetch all records.
  • Add context-aware error message when the active profile points to a non-existent profile configuration.
  • Add Domain conversion to K8s Converter.
  • Change default workload type to standard in create and convert commands.
    Before v3.9.0, the K8s Converter produced a mix of serverless and standard workloads; from v3.9.0 on, every converted Deployment is standard unless a stateful condition applies. The workload type is immutable, so re-running cpln apply --k8s against workloads created by an older CLI can fail with Workload type may not be changed (405). Pin the type in the K8s manifest with the cpln.io/workload-type annotation to keep it stable across CLI versions.
  • Deprecate --remove flag in favor of --remove-tag for tag commands.
  • Show Now instead of 0 minutes ago for recent timestamps.
  • Fix incorrect --rel flag description in query options.
• Patch Changes
  • Fix Helm release status not being marked as failed when resource link resolution fails, which could leave releases stuck in pending-install or pending-upgrade status.
  • Fix error formatting to display network errors (e.g., certificate failures) instead of showing an empty object.
  • Fix numeric environment variable values breaking cpln helm install.
  • Fix tilde (~) expansion in user-provided file paths for commands like cpln agent up.
  • Fix cpln login blank page in binary distributions.
  • Add fallback to legacy docker build when docker buildx is unavailable in cpln image build.

​

CLI v3.8.2 Release

• Date: January 16, 2026
• Version Info
  • npm: 3.8.2
• Patch Changes
  • Fixed binary startup issues affecting cpln and docker-credential-cpln on macOS and other platforms.

​

CLI v3.8.1 Release

• Date: January 15, 2026
• Version Info
  • npm: 3.8.1
• Patch Changes
  • Fixed an issue where the cpln binary would fail to start on macOS and other platforms.

​

CLI v3.8.0 Release

• Date: January 15, 2026
• Version Info
  • npm: 3.8.0
• Minor Changes
  • Add buildpack / b, env, envFile, trust-builder and trust-extra-buildpacks args to cpln image build command for building an image with Cloud Native Buildpacks.
  • Add --platform arg to cpln image build command.
  • Auto-detect Dockerfile from —dir directory in cpln image build command.
  • Fix package vulnerabilities.

​

CLI v3.7.5 Release

• Date: December 10, 2025
• Version Info
  • npm: 3.7.5
• Patch Changes
  • Enforce history limit post‑success and prune to configured depth in cpln helm command.

​

CLI v3.7.4 Release

• Date: December 4, 2025
• Version Info
  • npm: 3.7.4
• Patch Changes
  • Update buildpacks builder to build using platform linux/amd64.

​

CLI v3.7.3 Release

• Date: December 4, 2025
• Version Info
  • npm: 3.7.3
• Patch Changes
  • Update buildpacks to 0.39.0.

​

CLI v3.7.2 Release

• Date: November 10, 2025
• Version Info
  • npm: 3.7.2
• Patch Changes
  • cpln image build now uses docker buildx build.

​

CLI v3.7.1 Release

• Date: October 22, 2025
• Version Info
  • npm: 3.7.1
• Patch Changes
  • Update agent default image.
  • Read x-cpln stanza in docker-compose to override and extend workload spec.
  • Assume port protocol from port number in cpln convert command.

​

CLI v3.7.0 Release

• Date: September 12, 2025
• Version Info
  • npm: 3.7.0
• Major Changes
  • A chart path is now required when running any of the following commands:
    • cpln helm template
    • cpln helm install
    • cpln helm upgrade
• Minor Changes
  • Add --repo flag to install/upgrade helm charts from OCI registries or Helm repositories. Refer to the cpln helm guide for more info.
  • Add --install flag to cpln helm upgrade to automatically create and install a release with the given name if not present.
• Patch Changes
  • Enforce validation so non-CPLN resources cause install or upgrade to fail.
  • Fix Helm notes rendering issue.
  • Update default image for cpln workload run command to ubuntu:latest.
  • Allow bare keys in .env to default to empty values in cpln stack command.

​

CLI v3.6.1 Release

• Date: August 20, 2025
• Version Info
  • npm: 3.6.1
• Patch Changes
  • Fix resource not found during helm release migration to version 4.

​

CLI v3.6.0 Release

• Date: August 20, 2025
• Version Info
  • npm: 3.6.0
• Minor Changes
  • Add --dependency-update to cpln helm commands.
• Patch Changes
  • Fix typos and grammar mistakes.
  • Fix the displayed release name on error if user attempts to override a resource of a different release in cpln helm.
  • Fix cpln helm tag handling to persist only tags specified with —tag option and drop removed/unwanted ones.
  • Return a non-zero code if a backend error occurred in cpln workload exec or cpln workload connect commands.
  • Fix a cpln port-forward local server error for packaged binaries.
  • Fix K8s Converter Logging service 400 status on submit with refresh token.
  • Add public exposure detection to workload firewall in K8s K8s Converter.
  • Fix command array parsing to correctly assign extra items to args in K8s Converter.
  • Prevent subPath to be appended to mount path during K8s conversion.

​

CLI v3.5.6 Release

• Date: July 11, 2025
• Version Info
  • npm: 3.5.6
• Patch Changes
  • Validate org name after parsing service account token during profile update.
  • Decode docker secret data if it is in base64 format.
  • Handle securityContext in K8s converter.
  • Decode dictionary secret values if the data is base64.
  • Fix helm list max limit being applied before processing revisions.
  • Show the helm release name not the secret name if the resource doesn’t belong to the release being installed.
  • Add cpln workload cron stop to be an alias of replica stop command.

​

CLI v3.5.5 Release

• Date: June 6, 2025
• Version Info
  • npm: 3.5.5
• Patch Changes
  • Fix issue where the cpln port-forward command session disconnects after 1 hour.

​

CLI v3.5.4 Release

• Date: June 5, 2025
• Version Info
  • npm: 3.5.4
• Patch Changes
  • Fix issue where the workload’s ready status was not displayed correctly when running the cpln workload get command.

​

CLI v3.5.3 Release

• Date: May 23, 2025
• Version Info
  • npm: 3.5.3
• Patch Changes
  • Fix issue where Helm release was uninstalled on cpln helm upgrade when history limit was reached.

​

CLI v3.5.2 Release

• Date: May 9, 2025
• Version Info
  • npm: 3.5.2
• Patch Changes
  • Add —state-tag argument to cpln helm install & cpln helm upgrade.
  • Fix tags in helm release resources during cpln helm install & cpln helm upgrade.

​

CLI v3.5.1 Release

• Date: May 5, 2025
• Version Info
  • npm: 3.5.1
• Patch Changes
  • Hot fix for cpln image build command.

​

CLI v3.5.0 Release

• Date: May 5, 2025
• Version Info
  • npm: 3.5.0
• Minor Changes
  • Add YAML document separator for CRD list items.
  • Separate helm release deployments into individual secrets.
  • Prevent Helm release upgrades via cpln helm install; use cpln helm upgrade instead.
  • Add a limit to the release name length.
  • Add cpln helm get all subcommand.
  • Add cpln helm get notes subcommand.

​

CLI v3.4.5 Release

• Date: April 14, 2025
• Version Info
  • npm: 3.4.5
• Patch Changes
  • Add K8s CRD as an output option. (--output crd)
  • Fix agent default image.
  • Map health probe port to the number defined by the container port name in the cpln convert command.
  • Limit concurrent streams for the cpln cp command.
  • Measure upload/download speed instantaneously in the cpln cp command.
  • Allow rollback to deployed deployment in the cpln helm rollback command.
  • Remove unnecessary apostrophe at the end of the applied template link in the cpln helm command.
  • Avoid applying a resource with its GVC property in the cpln helm command.
  • Remove the requirement for the ‘type’ property within a K8s Secret in the cpln convert command.
  • Ensure unique names for PVCs defiend inside a StatefulSet workload in the cpln convert command.

​

CLI v3.4.4 Release

• Date: March 28, 2025
• Version Info
  • npm: 3.4.4
• Patch Changes
  • Add cpln operator command.
  • Fix broken agent image issue affecting cpln agent up command.
  • Disable remote port validation in the cpln port-forward command.
  • Convert CPU and memory requests when no limits are specified in the Kubernetes converter.
  • Add CPLN_SKIP_UPDATE_CHECK environment variable to optionally bypass automatic update checks.
  • Fix typo for the defaulted location in the cpln connect / cpln exec commands.
  • Change cpln helm output to always display full links.

​

CLI v3.4.3 Release

• Date: March 17, 2025
• Version Info
  • npm: 3.4.3
• Patch Changes
  • Update the cpln port-forward command to correctly handle refresh tokens.

​

CLI v3.4.2 Release

• Date: March 14, 2025
• Version Info
  • npm: 3.4.2
• Patch Changes
  • Submit a ticket to record a one-time audit trail entry for the cpln port-forward command.
  • Automatically connect to a different replica for each session when no specific replica is provided to the cpln port-forward command.

​

CLI v3.4.1 Release

• Date: February 28, 2025
• Version Info
  • npm: 3.4.1
• Patch Changes
  • Improve cpln port-forward command.

​

CLI v3.4.0 Release

• Date: February 25, 2025
• Version Info
  • npm: 3.4.0
• Minor Changes
  • Add cpln port-forward command.

​

CLI v3.3.2 Release

• Date: February 17, 2025
• Version Info
  • npm: 3.3.2
• Patch Changes
  • Add --build option for stack commands.

​

CLI v3.3.1 Release

• Date: January 23, 2025
• Version Info
  • npm: 3.3.1
• Patch Changes
  • Convert user email characters to lowercase when inviting users.
  • Fix referencing existing secrets within workloads in Helm.

​

CLI v3.3.0 Release

• Date: January 1, 2025
• Version Info
  • npm: 3.3.0
• Minor Changes
  • Add loadBalancer to cpln workload update command.
  • Add shared to volume set create command.
  • Add ipset command.
  • In cpln helm, avoid applying GVC related resources if GVC does not exist.
  • In cpln helm, avoid updating unchanged resources.
  • In cpln helm, introduce cpln/secret: tag when applying a Helm chart to update workloads that reference secrets.
  • Call the K8s converter logging service.
  • Print and highlight ignored properties of K8s objects when doing cpln convert with the --verbose option.
  • Disable nearest year rounding in table format.

​

CLI v3.2.1 Release

• Date: December 2, 2024
• Version Info
  • npm: 3.2.1
• Patch Changes
  • Fix yaml output for cpln convert.
  • Handle tar errors and warnings.
  • Fix cpln cp for Windows.
  • Inject more cpln context to helm template.
  • Convert individual K8s Jobs.

​

CLI v3.2.0 Release

• Date: November 1, 2024
• Version Info
  • npm: 3.2.0
• Minor Changes
  • Add ‘names’ as a new output option.
  • Enhance cpln cp reliability and performance.
  • Add progress indicator for cpln cp.
  • Fix priority resource deletion order in cpln helm uninstall.
  • Add --all option to cpln helm get values.

​

CLI v3.1.1 Release

• Date: August 26, 2024
• Version Info
  • npm: 3.1.1
• Patch Changes:
  • Fix a bug causing invalid target links in policies when converting K8s files using the cpln convert.
  • Add tags that are passed to cpln helm install to the state as well.

​

CLI v3.1.0 Release

• Date: August 19, 2024
• Version Info
  • npm: 3.1.0
• Major Changes:
  • Refactor of cpln workload exec command:The cpln workload exec command has been updated to align with the functionality of kubectl exec.For more details, refer to the cpln workload exec guide.
    • Stdin and TTY Handling: Previously, stdin and TTY were enabled by default. Now, these must be explicitly set:
      • Use the -i option to send stdin to the workload.
      • Use the -t option to treat stdin as TTY.
• Minor Changes:
  • Improve cpln convert command to convert ConfigMaps, Persistent Volume Claims and pull secrets.
  • Add --encoding option to cpln secret create-opaque command.
  • Fix path syntax for cpln mk8s kubeconfig command on Windows.
  • Use the first location of a GVC if the --location option is not specified for cpln workload exec, cpln workload connect and cpln cp commands. Specifying a location is no longer required.

​

CLI v3.0.0 Release

• Date: July 22, 2024
• Version Info
  • npm: 3.0.0
• Notes:
  • Fix cpln cp.
  • Allow identity name for policy binding.

​

CLI v2.4.0 Release

• Date: July 15, 2024
• Version Info
  • npm: 2.4.0
• Notes:
  • Use cpln://reference to reference fieldRef for K8s Converter.
  • Add BYOK location support.
  • Allow setting profile’s default org and gvc to empty.
  • Optimize the performance of the cpln helm list command.
  • Add cpln cp command.
  • Directly stream stdin to the workload replica when using the cpln workload exec and cpln workload run commands.

​

CLI v2.3.1 Release

• Date: June 9, 2024
• Version Info
  • npm: 2.3.1
• Notes:
  • Fix stdin null issue on macOS.

​

CLI v2.3.0 Release

• Date: June 7, 2024
• Version Info
  • npm: 2.3.0
• Notes:
  • Query by GVC if —gvc option is specified.
  • Fix stack capture of command & args.
  • Retry requests upon hitting rate limits.
  • Remove maxContentLength limit.
  • Handle standard input (stdin) in workload exec.
  • Enhance error handling for Helm deployment API call failures.
  • Add —no-cache argument to image build command.

​

CLI v2.2.2 Release

• Date: May 28, 2024
• Version Info
  • npm: 2.2.2
• Notes:
  • Notify users of a new CLI version once a day.
  • Prevent a helm release from managing a resource that belongs to a different release.

​

CLI v2.2.1 Release

• Date: May 15, 2024
• Version Info
  • npm: 2.2.1
• Notes:
  • Add retry to internal API requests.
  • Helm: Skip resource deletion if specified.

​

CLI v2.2.0 Release

• Date: May 15, 2024
• Version Info
  • npm: 2.2.0
• Notes:
  • Additional k8s converter functionality.

​

CLI v2.1.0 Release

• Date: April 24, 2024
• Version Info
  • npm: 2.1.0
• Notes:
  • Truncate description text if length > 40 characters.
  • Add alias and update location table view for mk8s.

​

CLI v2.0.2 Release

• Date: April 1, 2024
• Version Info
  • npm: 2.0.2
• Notes:
  • Fix terminal interrupt handlers.
  • Provide user with a manual delete command to delete workload if workload run fails.
  • Fix generate name bug in helm.
  • Modify priority order in order for policy to be created before workload.

​

CLI v2.0.1 Release

• Date: March 18, 2024
• Version Info
  • npm: 2.0.1
• Notes:
  • Add CRON get command.
  • Add fetch pages to CRON get and snapshot get.
  • Limit cron get and snapshot get output to —max.
  • Add release notes page to readme.
  • Add delete and get volume commands.
  • Enforce valid naming in stack command.
  • Require location for workload connect/exec command.
  • Add resize terminal feature to workload run interactive.
  • Fix protocol override in k8s converter.
  • Add stop replica command.
  • Add helm rollback and helm history.
  • Add helm upgrade command.
  • Remove clone command from volumeset.
  • Upgrade default buildpacks to builder:22.

​

CLI v1.6.0 Release

• Date: February 7, 2024
• Version Info
  • npm: 1.6.0
• Notes:
  • Print workload cron start command output as a table.
  • Add container override arguments to the workload cron start command.
  • Fix file option to load from stdin when file option is optional.
  • Update description for: clone, Expand volume set, snapshot.
  • Fix command snapshot date formats.
  • For snapshot, Update column name from Created to Snapshot Created.
  • Logs: add -f as alias to -t.
  • Fix delete in workload run command.
  • Add external id to AWS and ECR secrets.
  • Update dependencies.

​

CLI v1.5.4 Release

• Date: January 23, 2024
• Version Info
  • npm: 1.5.4
• Notes:
  • Add ACTIVE column for profiles.
  • Modify helm list to display release names only.
  • Print NOTES.txt on helm install.
  • Sort helm template output before applying.
  • Add helm wait option.
  • Helm —wait option to wait 5m if —timeout is not provided.
  • Fix for terminal resizing.
  • Inject GVC into the helm template command as a value.
  • Add volume set and snapshot commands.
  • Add cron and replica sub-commands to workload.

​

CLI v1.5.2 Release

• Date: December 6, 2023
• Version Info
  • npm: 1.5.2
• Notes:
  • Fix workload connect prompt length and line wraps.
  • Improve workload connect prompt issue.
  • Resizing terminal on the initial connection.
  • Change login port to 48794.
  • Add check for latest release.
  • Add stack command.
  • Add helm command.
  • Add —replace flag.

​

CLI v1.4.0 Release

• Date: November 21, 2023
• Version Info
  • npm: 1.4.0
• Notes:
  • Fix prompt length and line wrap when connecting to workload + Improve volumeset deletion.
  • Force delete command.
  • Fix SAML login.
  • Add tags enabled for the workload run command.

​

CLI v1.3.2 Release

• Date: October 30, 2023
• Version Info
  • npm: 1.3.2
• Notes:
  • Remove deploy timestamp tag from slimmed objects.
  • Add account get and org create.
  • Add token server.

​

CLI v1.2.6 Release

• Date: October 16, 2023
• Version Info
  • npm: 1.2.6
• Notes:
  • Remove deploy timestamp tag from slimmed output.
  • Connect to first replica if multiple are present.
  • Add ready flag to apply command.
  • Add remove tag flag.
  • Adding useful error messages to auto-completion installation.

​

CLI v1.2.5 Release

• Date: September 28, 2023
• Version Info
  • npm: 1.2.5
• Notes:
  • Fix bug in setting sleep for ubuntu image on run cmd.
  • Deprecate container port property. Use ports going forward.
  • Inform user on verbose mode when CPLN_ORG, CPLN_GVC, CPLN_ENDPOINT or CPLN_PROFILE is being used.
  • Add mk8s command.
  • Fix GVC add/remove location commands when resource doesn’t contain a location property.
  • Improved slim output format.
  • Add recursive folder support for apply command.
  • Add Terraform output option.
  • Add retry logic to the workload run command.

​

CLI v1.1.0 Release

• Date: July 9, 2023
• Version Info
  • npm: 1.1.0 / Build: 925739349 / Version: 9784f19
• Notes:
  • Added json-slim and yaml-slim output options.

​

CLI v1.0.0 Release

• Date: June 27, 2023
• Version Info
  • npm: 1.0.0 / Build: 912602973 / Version: bddd583
• Notes:
  • Logs: maxBodySize not set when reading.
  • Inform user when the environment variable CPLN_TOKEN is being used for authentication.
  • Updates to cpln workload run command.

​

CLI v0.0.90 Release

• Date: May 5, 2023
• Version Info
  • npm: 0.0.90 / Build: 859056052 / Version: b58459f
• Notes:
  • Update HTML on cpln login browser page.

​

CLI v0.0.82-89 Release

• Date: April 21, 2023
• Version Info
  • npm: 0.0.89 / Build: 844733757 / Version: ba7245d
• Notes:
  • Fix get all workloads from all GVCs.
  • Update image copy command to use a destination profile.
  • Workload run command.
  • Allow --tag to accept an optional value.

​

CLI v0.0.82 Release

• Date: March 15, 2023
• Version Info
  • npm: 0.0.82 / Build: 807750891 / Version: 99792cd
• Notes:
  • Added image copy command.

​

CLI v0.0.73-81 Release

• Notes:
  • K8s converter not creating identity and policy if not required.
  • Added prestop hook for k8s converter.
  • Added GVC environment variables and container inherit environment variables.
  • Added active deadline seconds to workload update command.
  • Fixed token for fetching logs, exec, and connect.
  • Fixed long websocket connections.
  • Added SAML login.
  • Fix workload create for standard workload type.
  • Added workload ready status to workload get command.
  • Command: Only enable raw mode if it’s TTY.

​

CLI v0.0.72 Release

• Date: November 7, 2022
• Version Info
  • npm: 0.0.72 / Build: 687290579 / Version: 718968f
• Notes:
  • Added docker store and erase commands. Fixes issue when using both cpln image and docker login commands.

​

CLI v0.0.71 Release

• Date: November 2, 2022
• Version Info
  • npm: 0.0.71 / Build: 683695375 / Version: 3124c60
• Notes:
  • Added instructions to create an Azure Connector Cloud Account.
  • Added delete resource from files command cpln delete.
  • Added k8s manifest to Control Plane manifest converter command cpln convert.
  • Added stop/start/suspend commands to cpln workload.
  • Added cpln workload exec command.
• Installation Instructions

​

CLI v0.0.61 Release

• Date: August 30, 2022
• Version Info
  • npm: 0.0.61 / Build: 626945486 / Version: 2f98cdd
• Notes:
  • Updated agent image version.
  • Added standard workload.

​

CLI v0.0.60 Release

• Date: August 24, 2022
• Version Info
  • npm: 0.0.60 / Build: 621247366 / Version: cd5c35e
• Notes:
  • Updated agent image version.

​

CLI v0.0.59 Release

• Date: July 28, 2022
• Version Info
  • npm: 0.0.59 / Build: 599431645 / Version: 4ebdf36
• Notes:
  • Added NGS Cloud Account.
  • Added NATS Account Secret type.
  • Removed GVC domain.
  • Upgrade buildpacks to version 0.27.0.

​

CLI v0.0.57 Release

• Date: May 23, 2022
• Version Info
  • npm: 0.0.57 / Build: 545699003 / Version: e16bbbf
• Notes:
  • Add default of 50 maximum records.
  • Fix issue when using a value < 1 to return all records.
  • Fix issue when updating container memory.
  • Add additional set flags for the workload update command.

​

CLI v0.0.55 Release

• Date: February 21, 2022
• Version Info
  • npm: 0.0.55 / Build: 475892711 / Version: 6b87320
• Notes:
  • Add —psp flag for agent manifest command to configure a pod security policy.
  • Enable the k8s agent to run as a privileged pod.

​

Previous Versions

​

CLI v0.0.54 Release

• Date: February 10, 2022
• Version Info
  • npm: 0.0.54 / Build: 467951861 / Version: 7c17ca8
• Notes:
  • Fix issues with the k8s Agent.
  • Fix issue when building images on ARM64 machines.

​

CLI v0.0.52 Release

• Date: January 20, 2022
• Version Info
  • npm: 0.0.52 / Build: 452736596 / Version: bffc420
• Notes:
  • Updated login page.
  • Fix issue persisting profile default GVC when using the —token flag.

​

CLI v0.0.50 Release

• Date: December 28, 2021
• Version Info
  • npm: 0.0.50 / Build: 438151551 / Version: f1586e9
• Notes:
  • Update pack to version 0.23.0.
  • Added ARM64 support for pack.

​

CLI v0.0.49 Release

• Date: November 30, 2021
• Version Info
  • npm: 0.0.49 / Build: 419000724 / Version: cdc6af5
• Notes:
  • Fix issue building an image using an ARM processor.

​

CLI v0.0.48 Release

• Date: November 18, 2021
• Version Info
  • npm: 0.0.48 / Build: 411017996 / Version: d1b67a5
• Notes:
  • Updated k8s agent version.

​

CLI v0.0.47 Release

• Date: November 11, 2021
• Version Info
  • npm: 0.0.47 / Build: 407265118 / Version: 140e31f
• Notes:
  • Added cpln agent manifest command to allow running an agent on a k8s cluster.

​

CLI v0.0.46 Release

• Date: October 11, 2021
• Version Info
  • npm: 0.0.46 / Build: 386067508 / Version: 7ca3dd7
• Notes:
  • Update error handling:
    • All errors are outputted to stderr.
    • If the -o flag is set to json or yaml, the output will be in the respective format. If -o is set to text, only the output of the .message property from response object will be outputted. Otherwise, output the error.message property from the exception.
    • If there are multiple actions, any errors will be included in the output.
    • The exit code will be 1 if at least one action failed.
  • Added force-redeployment subcommand to the workload command.

​

CLI v0.0.44 Release

• Date: September 10, 2021
• Version Info
  • npm: 0.0.44 / Build: 368794552 / Version: 6435502
• Notes:
  • New workload subcommands:
    • connect: Connect to a replica of the workload.
    • get-replicas: Get the replicas of the referenced workload in a given location.

​

CLI v0.0.43 Release

• Date: September 7, 2021
• Version Info
  • npm: 0.0.43 / Build: 365437960 / Version: f3f59d1
• Notes:
  • New secret type: azure-connector

​

CLI v0.0.42 Release

• Date: July 16, 2021
• Version Info
  • npm: 0.0.42 / Build: 338229644 / Version: db33b86
• Notes:
  • CLI can work without CPLN_ENDPOINT
  • Allow environment variables without a value
  • Add mount volumes to workload

​

CLI v0.0.41 Release

• Date: July 14, 2021
• Version Info
  • npm: 0.0.41 / Build: 336244315 / Version: b864944
• Notes:
  • Create ~/.docker during cpln image docker-login

​

CLI v0.0.40 Release

• Date: June 30, 2021
• Version Info
  • npm: 0.0.40 / Build: 329714271 / Version: 4c67950
• Notes:
  • Infers container name from image name unless defined using the —container-name argument.
  • Set internal firewall to same-org when the --public flag is used during the creation of a workload.

​

CLI v0.0.39 Release

• Date: June 22, 2021
• Version Info
  • npm: 0.0.39 / Build: 325071193 / Version: acbc925
• Notes:
  • Added ‘smart’ reveal to secret output format
  • Added multi-document sources for the apply command

​

CLI v0.0.38 Release

• Date: June 16, 2021
• Version Info
  • npm: 0.0.38 / Build: 321518748 / Version: aa315ea
• Notes:
  • Remove account subcommand and references
  • Update buildpacks to version 0.19.0
  • Add create-ecr secret command
  • Fix create command for Cloud Account to include additional error messages
  • Fix issue when shell would close when running cpln login

​

CLI v0.0.36 Release

• Date: June 7, 2021
• Version Info
  • npm: 0.0.36 / Build: 315420524 / Version: cb4cb4f
• Notes:
  • For the binary package, include the executable docker-credential-cpln in the same archive as the CLI

​

CLI v0.0.34 Release

• Date: May 31, 2021
• Version Info
  • npm: 0.0.34 / Build: 312124373 / Version: 0a44b37
• Notes:
  • Make profile optional if at least —endpoint & —token flags are set
  • When there is a profile present, honor the environment variables ‘CPLN_ORG’, ‘CPLN_GVC’, ‘CPLN_ENDPOINT’, and ‘CPLN_TOKEN’
  • Install auto-completion for non-interactive installation

​

CLI v0.0.33 Release

• Date: May 6, 2021
• Version Info
  • npm: 0.0.33 / Build: 298694423 / Version: 30dc6d4
• Notes:
  • Added task as a policy target kind
  • Resume cpln logs stream on disconnect
  • Refresh authentication token before getting logs
  • Fix for missing Docker config.json file

​

CLI v0.0.31 Release

• Date: May 1, 2021
• Version Info
  • npm: 0.0.31 / Build: 295632825 / Version: 01e4461
• Notes:
  • Added cpln agent info command

​

CLI v0.0.30 Release

• Date: April 27, 2021
• Version Info
  • npm: 0.0.30 / Build: 293303600 / Version: 81bde51
• Notes:
  • Fix for the closing of a command or PowerShell shell in Windows 10 if the cpln login command is executed.
  • Updated axios to version 0.21.1